Order Products : sales@su-jiao.com
Eltex® MED 100-MG25
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | INEOS Olefins & Polymers Europe |
| Trademark: | Eltex® MED |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GU9NBv_Eltex-MED-100-MG25.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Benefits & Features Eltex® MED 100-MG25 is a narrow molecular weight distribution non-nucleated polypropylene homopolymer, intended for injection moulding converting processes requiring high melt flow, fast-cycling multi-cavity tooling operations, and good dimensional stability. Eltex® MED 100-MG25 is produced according to Good Manufacturing Practices, and is available in granular form. Applications Eltex® MED 100-MG25 is especially recommended for the manufacture by injection moulding of syringe and metered-dose inhaler components, Caps & Closures, thin wall containers as well as tubes, intended for the primary packaging of medical and pharmaceutical applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 25 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, 23°C) | 32.0 | MPa | ISO 527-2 |
| Flexural Modulus (23°C) | 1200 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 2.4 | kJ/m² | ISO 179/A |
| Notched Izod Impact Strength (23°C) | 3.2 | kJ/m² | ISO 180/A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 102 | °C | ISO 75-2/B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polytech & Net VC590 | Polytech & Net Gmbh | EVA | Polytech & Net |
| RC Plastics RCPCA10 | RC Plastics, Inc. (Div. of LNP Engineering Plastics) | PC+ABS | RC Plastics |
| SABIC® LLDPE 6821W | Saudi Basic Industries Corporation (SABIC) | LLDPE | SABIC® LLDPE |
| Softell TBP 237D NAT | LyondellBasell Industries | Polyolefin, Unspecified | Softell |
| LubriOne™ AT-10CF/5T BLACK | PolyOne Corporation | Acetal (POM) Copolymer | LubriOne™ |
