Order Products : sales@su-jiao.com
ESTOPLAST PP 3025WW01
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Ester Industries Ltd. |
| Trademark: | ESTOPLAST PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GSgexA_ESTOPLASTPP3025WW01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polypropylene - 25% Mineral filled, White Electrical & Electronics: Power distribution components |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 20.0 | MPa | ASTM D638 |
| Flexural Strength | 32.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 80 | J/m | ASTM D256 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.5 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 75 - 85 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Rear Temperature | 190 - 200 | °C | |
| Middle Temperature | 210 - 220 | °C | |
| Nozzle Temperature | 210 - 220 | °C | |
| Processing (Melt) Temp | 200 - 210 | °C | |
| Mold Temperature | 60 - 80 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sarlink® TPE OM-2368N | Teknor Apex Company | TPE | Sarlink® TPE |
| Silplus® 60 HS | Momentive Performance Materials Inc. | Silicone Rubber, HTV | Silplus® |
| CALIBRE™ 201-18 | Trinseo | PC | CALIBRE™ |
| Andur M-10 (1,4BD) | Anderson Development Company | PUR-Ether/MDI | Andur |
| ENFLEX S3060A | ENPLAST Americas, a Ravago Group Company | TPE | ENFLEX |
