Order Products : sales@su-jiao.com
INEOS PP R01C-01
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GSSWcD_INEOS-PP-R01C-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| R01C-01 is a low melt flow rate high clarity nucleated random copolymer designed for extruded sheet and profiles, including blow molding and thermoformed packaging. End-use applications that require good see-through clarity combined with good heat resistance and refrigerator temperature impact properties can benefit from using R01C-01. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.903 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 81 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 29.4 | MPa | |
| Break | 18.9 | MPa | |
| Tensile Elongation 2 | ASTM D638 | ||
| Yield | 13 | % | |
| Break | 170 | % | |
| Flexural Modulus - 1% Secant | 1090 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| 4°C | 27 | J/m | |
| 23°C | 340 | J/m | |
| Notched Izod Impact (Area) | ASTM D256 | ||
| 4°C | 2.60 | kJ/m² | |
| 23°C | 33.4 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 87.8 | °C | ASTM D648 |
| Vicat Softening Temperature | 133 | °C | ASTM D1525 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (60°) | 97 | ASTM D2457 | |
| Haze 3(1270 µm) | 16 | % | ASTM D1003 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 23°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ DP 9052-3-1000 | PolyOne Corporation | HDPE | Maxxam™ |
| RTP EMI 160.5 | RTP Company | PP, Unspecified | RTP |
| Menzolit® SMC 0800 | Menzolit Ltd (UK) | Polyester, TS | Menzolit® |
| Altuglas® BS 684 | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Altuglas® |
| Hostalen ACP 9240 Plus | LyondellBasell Industries | HDPE | Hostalen |
