Order Products : sales@su-jiao.com
Monprene® OM-10160-01
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Monprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GRSbBP_Monprene-OM-10160-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Monprene® OM-10160-01 is a Thermoplastic Elastomer (TPE) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Typical applications include:
|
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.928 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 3.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 60 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 7.58 | MPa | ASTM D412 |
| Tensile Strength (Break) | 7.93 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 300 | % | ASTM D412 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Adhesion to Nylon |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Rear Temperature | 232 to 243 | °C | |
| Middle Temperature | 249 to 266 | °C | |
| Front Temperature | 266 to 277 | °C | |
| Nozzle Temperature | 271 to 288 | °C | |
| Processing (Melt) Temp | 268 to 277 | °C | |
| Mold Temperature | 23.9 to 60.0 | °C | |
| Injection Pressure | 1.38 to 6.89 | MPa | |
| Injection Rate | Fast | ||
| Back Pressure | 0.172 to 0.862 | MPa | |
| Screw Speed | 50 to 120 | rpm | |
| Cushion | 3.81 to 25.4 | mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1385 TFE 15 | RTP Company | PPS | RTP |
| Adell Polyamide CR-16 | Adell Plastics, Inc. | Nylon, Unspecified | Adell Polyamide |
| Altuglas® BS 684 | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Altuglas® |
| INLUBE PA66GF30TF13SI2 | Infinity LTL Engineered Compounds | Nylon 66 | INLUBE |
| INLUBE PBTCF15TF15 | Infinity LTL Engineered Compounds | PBT | INLUBE |
