Order Products : sales@su-jiao.com
CERTENE鈩?HI-954
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GQeOrB_CERTENE-HI-954.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HI-954 is a certified prime copolymer designed for INJECTION MOLDING applications requiring good balance of mechanical properties. HI-954 features easy-processability, superior stiffness, exceptional impact strength, high warpage resistance and excellent dimensional stability. HI-954 is especially suitable for pails, crates, tote and storage bins. HI-954 is not UV stabilized. Recommended processing temperature is 210 to 250°C. with mold @ 20 to 40°C.. HI-954 complies with FDA regulation 21CFR 177.1520 (c) 3.2 (a) and with most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.954 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 9.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance 1(50°C, 1.75 mm, 100% Igepal, Compression Molded, F50) | > 10.0 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, Compression Molded) | 28.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Compression Molded) | > 1200 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(Compression Molded) | 1230 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | 57.0 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 129 | °C | ASTM D1525 |
| Additional Information |
|---|
| Test specimens from compression molded plaque according to ASTM D 1928 Procedure C. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 210 - 250 | °C | |
| Mold Temperature | 20.0 - 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Notched Bent Strip |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2288 LF | RTP Company | PEEK | RTP |
| Tecnoflon® PL 458 | Solvay Specialty Polymers | Fluorelastomer | Tecnoflon® |
| NuSil MED-4970 | NuSil Technology | Silicone Rubber, LSR | NuSil |
| APEL™ APL5514ML | Mitsui Chemicals America, Inc. | COC | APEL™ |
| Argothane® 18305 | Argotec LLC | TPU, Unspecified | Argothane® |
