Order Products : sales@su-jiao.com
RELENE® 54GB012
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GPwyat_RELENE-54GB012.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 54GB012 is a High Density Polyethylene (HDPE) blow moulding grade. It possesses relatively higher density and stiffness, good flow and impact strength, good ESCR and bimodel molecular weight distribution for easy processability. 54GB012 can readily be processed on most HDPE blow moulding lines. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.954 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 1.2 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 27.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 11 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 900 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Injection Molded) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 127 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Monprene® OM-16260 | Teknor Apex Company | TPE | Monprene® |
| THERMOLAST® K TF6BTL (Series: FC/AP) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Unichem 5790A | Colorite Polymers | PVC, Unspecified | Unichem |
| NEXT SIGNATURE PA6 G33-100 | NEXT Specialty Resins, Inc. | Nylon 6 | NEXT SIGNATURE |
| HiFill® PA6 GF/M30 HS BK | Techmer Engineered Solutions | Nylon 6 | HiFill® |
