Order Products : sales@su-jiao.com

3M™ Dyneon™ PTFE Compound TF 3406

Category:	PTFE , Polytetrafluoroethylene
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ PTFE Compound
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GOUIfm_3MDyneonPTFECompoundTF3406.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

3M™ Dyneon™ PTFE Compound TF 3406 is a non-free-flowing suspension PTFE compound containing 60 % oxidation-resistant bronze for compression moulding.

Special Features

Increased thermal dimensional stability

Increased surface hardness

Improved deformation under load

Reduced friction & wear

Low moulding pressure

High limiting oxygen index (LOI)

Low friction behaviour

Improved mechanical properties

Exceptional temperature resistance

Good chemical stability

General Information
Filler / Reinforcement	Bronze filler, 60% filler by weight
Features	Low friction coefficient
Uses	Seals Application in Automobile Field
Forms	Powder
Processing Method	Compression molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	3.93	g/cm³	ASTM D4745-06
Apparent Density	0.90	g/cm³	ASTM D4894-07
Molding Shrinkage - Flow	1.8	%	ASTM D4894-07

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	73		DIN 53505

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	20.5	MPa	ASTM D4745-06
Tensile Elongation (Break)	300	%	ASTM D4745-06

Resin Grade	Manufacturer	Category	Trademark
Boda BDF-H2652	Chenguang Fluoro & Silicone Elastomers Co., Ltd.	Fluorelastomer	Boda
Bormed™ HE9621-PH	Borealis AG	HDPE	Bormed™
KumhoSunny ASA XC200	Shanghai KumhoSunny Plastics Co., Ltd.	ASA	KumhoSunny ASA
LUVOCOM® 1105/CF/30/EM	Lehmann & Voss & Co.	PEEK	LUVOCOM®
Deprene 253-50	Shanghai Lin Gen Rubber Materials Co., Ltd.	PP+EPDM	Deprene