VESTAMID® L L-R3-EI Datasheet,Nylon 12,Evonik Industries AG-SHANGHAI SUSHENG

VESTAMID® L L-R3-EI

Category:	Nylon 12 , Polyamide 12
Manufacturer:	Evonik Industries AG
Trademark:	VESTAMID® L
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GNYp4T_VESTAMID-L-L-R3-EI.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Permanently antistatic and electrically conductive polyamide 12 compounds Characterization: high viscosity, heat- and light-stabilized, increased cold impact strength, with processing aid Application Examples: antistatic and electrically conductive moldings or extrudates for use in areas prone to explosion such as coal mining and other industries, e.g., housings for explosion-protected measurement equipment and switches, ventilation fans for electric motors, chair castors, loud speaker boxes, telephone and radio equipment, profiles for assembly lines, also with electric shock protection The properties of PA 12 compounds can be modified to suit the requirements of many applications by incorporating various additives such as stabilizers, plasticizers, reinforcements, and fillers. The VESTAMID® L compounds of Evonik comprise a range of various products that are customized to the requirements of processors and users. Many of the PA 12 compounds are suitable especially for the injection molding of recision parts; others have been developed specifically for the extrusion process.

Message

Permanently antistatic and electrically conductive polyamide 12 compounds

Characterization: high viscosity, heat- and light-stabilized, increased cold impact strength, with processing aid

Application Examples: antistatic and electrically conductive moldings or extrudates for use in areas prone to explosion such as coal mining and other industries, e.g., housings for explosion-protected measurement equipment and switches, ventilation fans for electric motors, chair castors, loud speaker boxes, telephone and radio equipment, profiles for assembly lines, also with electric shock protection

The properties of PA 12 compounds can be modified to suit the requirements of many applications by incorporating various additives such as stabilizers, plasticizers, reinforcements, and fillers.

The VESTAMID® L compounds of Evonik comprise a range of various products that are customized to the requirements of processors and users. Many of the PA 12 compounds are suitable especially for the injection molding of recision parts; others have been developed specifically for the extrusion process.

General Information
Additive	Heat Stabilizer Processing Aid UV Stabilizer
Features	Antistatic Electrically Conductive Fatigue Resistant Food Contact Acceptable Fuel Resistant Good Abrasion Resistance Good Impact Resistance Good Processability Grease Resistant Heat Stabilized High ESCR (Stress Crack Resist.) High Viscosity Light Stabilized Low to No Water Absorption Oil Resistant Solvent Resistant Sound Damping Vibration Damping
Uses	Electrical/Electronic Applications Housings Mining Applications Profiles
Agency Ratings	EU 10/2011
Appearance	Black
Processing Method	Extrusion

Physical	Nominal Value	Unit	Test Method
Density (23°C)	1.06	g/cm³	ISO 1183
Molding Shrinkage			ISO 294-4
Across Flow	1.6	%
Flow	1.6	%
Water Absorption			ISO 62
Saturation, 23°C	1.2	%
Equilibrium, 23°C, 50% RH	0.50	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1500	MPa	ISO 527-2
Tensile Stress			ISO 527-2
Yield	42.0	MPa
Break	36.0	MPa
Tensile Strain			ISO 527-2
Yield	9.0	%
Break	44	%

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-30°C, Complete Break	9.0	kJ/m²
23°C, Complete Break	21	kJ/m²
Charpy Unnotched Impact Strength			ISO 179/1eU
-30°C	No Break
23°C	No Break

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
0.45 MPa, Unannealed	130	°C	ISO 75-2/B
1.8 MPa, Unannealed	60.0	°C	ISO 75-2/A
Vicat Softening Temperature
--	175	°C	ISO 306/A
--	140	°C	ISO 306/B
Melting Temperature ¹	178	°C	ISO 11357-3
CLTE - Flow (23 to 55°C)	1.5E-4	cm/cm/°C	ISO 11359-2

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.0E+3	ohms·cm	IEC 60093
Insulation Resistance	1.0E+3	ohms	IEC 60167

Flammability	Nominal Value	Test Method
Flame Rating		UL 94
1.60 mm	HB
3.20 mm	HB

Additional Information	Nominal Value		Test Method
ISO Shortname	PA12-HI, EHZ, 22-010		ISO 1874

Note Message
1 .	2nd Heating

Resin Grade	Manufacturer	Category	Trademark
Generic PESU - Carbon Fiber	Generic	PESU	Generic
HiFill® ABS GM30 LE	Techmer Engineered Solutions	ABS	HiFill®
KOPA® KN333C22	Kolon Plastics, Inc.	Nylon 66	KOPA®
Karina RED PVC COMPOUND 701D42/266-SD	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
Mablex 274F	Ravago Group	PC+ABS	Mablex

Resin Grade

Manufacturer