Order Products : sales@su-jiao.com
RELENE® B 31101
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GLgpdq_RELENE-B-31101.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Relene B 31101 is a high density polyethylene grade with broad molecular weight distribution and good melt strength, suitable for producing compounds for steel pipe coating. This grade has excellent toughness/ESCR and good cut through/abrasion resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.943 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.28 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (Compression Molded) | 400 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Compression Molded) | 20.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, Compression Molded) | 800 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 122 | °C | ASTM D1525 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+17 | ohms·cm | ASTM D257 |
| Dielectric Constant | 2.25 | ASTM D150 | |
| Dissipation Factor | 4.0E-5 | ASTM D150 |
| Additional Information |
|---|
| Oxidation Induction Time, ASTM D3895: >20 min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenopom® POM B3 M2 NTLA014 PR302 MSP | Petropol Industry and Trade of Polymers LTDA | Acetal (POM) Copolymer | Tenopom® POM |
| Epoxies, Ect. 50-1220 | Epoxies, Etc. | Silicone | Epoxies, Ect. |
| LUVOCOM® 1301-8596 | Lehmann & Voss & Co. | PPS | LUVOCOM® |
| LNP™ STAT-KON™ SE003 compound | SABIC Innovative Plastics | Nylon 12 | LNP™ STAT-KON™ |
| LNP™ LUBRICOMP™ WL004 compound | SABIC Innovative Plastics | PBT | LNP™ LUBRICOMP™ |
