Order Products : sales@su-jiao.com
Microthene® G MN72700
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Microthene® G |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GKphnu_Microthene-G-MN72700.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Microthene G polyolefin powders are ground, irregularly-shaped particles for use in a broad range of specialty applications. Microthene G powders combine the unique properties of a polyolefin resin with a small ground particle size. |
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 24 | g/10 min | ASTM D1238 |
| Average Particle Size | 16 | mesh | |
| Particle Shape | Irregular |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore D | 56 | ||
| Shore D, 15 sec | 49 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 8.40 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 110 | % | ASTM D638 |
| Flexural Modulus | 342 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -28.3 | °C | ASTM D746 |
| Vicat Softening Temperature | 86.4 | °C | ASTM D1525 |
| Melting Temperature | 110 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shuman PC 930 | Shuman Plastics, Inc. | PC | Shuman PC |
| NEMCON H PC/ABS DP182 | Ovation Polymers Inc. | PC+ABS | NEMCON H |
| Geon™ Vinyl Flexible B9500 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| Hax™ HF 211 | Fainplast Compounds S.r.l | Polyolefin, Unspecified | Hax™ |
| KOPA® KN135G33CCHS | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
