Sarlink® TPE EE-2260B (PRELIMINARY DATA) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
The Sarlink EE-2200 Series is a general purpose thermoplastic elastomer series, available in BLK, designed for automotive exterior extrusion applications. Sarlink EE-2260B is a medium hardness, high density, UV stabilized grade with very good extrudability.

General Information
Additive	UV stabilizer
Features	High specific gravity High density Good UV resistance Workability, good Good flexibility Good adhesion Ozone resistance Good toughness Medium hardness
Uses	Application in Automobile Field Automotive exterior parts Car exterior decoration Rubber substitution
RoHS Compliance	RoHS compliance
Appearance	Black
Forms	Particle
Processing Method	Extrusion

Physical	Nominal Value	Unit	Test Method
Density	1.18	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	0.50	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ISO 868
Shaw A	63	ISO 868
Shaw A, 15 seconds	60	ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress			ISO 37
Transverse flow : 100% strain	1.60	MPa	ISO 37
Flow : 100% strain	2.20	MPa	ISO 37
Tensile Stress			ISO 37
Transverse flow : Fracture	9.10	MPa	ISO 37
Flow : Fracture	5.40	MPa	ISO 37
Tensile Elongation			ISO 37
Transverse flow : Fracture	790	%	ISO 37
Flow : Fracture	650	%	ISO 37
Tear Strength - Across Flow	29	kN/m	ISO 34-1
Compression Set			ISO 815
23°C, 22 hr	20	%	ISO 815
70°C, 22 hr	31	%	ISO 815
125°C, 70 hr	77	%	ISO 815

Fill Analysis	Nominal Value	Unit	Test Method
Apparent Viscosity (200°C, 206 sec^-1)	266	Pa·s	ASTM D3835

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	193 - 204	°C
Cylinder Zone 2 Temp.	199 - 210	°C
Cylinder Zone 3 Temp.	204 - 216	°C
Cylinder Zone 4 Temp.	210 - 221	°C
Cylinder Zone 5 Temp.	210 - 221	°C
Die Temperature	216 - 227	°C

Extrusion instructions
Screw Speed: 30 to 100 rpm

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Sarlink® TPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GKLUNB_SarlinkTPEEE2260BPRELIMINARYDATA.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
CELEX™ 5200HF.K	Trinseo	PC+ABS	CELEX™
Evoprene™ GC 642	AlphaGary	SEBS	Evoprene™ GC
Europrene® N OZO 7033/60	Versalis S.p.A.	PVC+NBR	Europrene®
LightSpan® LS-6143	NuSil Technology	Silicone	LightSpan®
Sylvin 9915-60 NATURAL	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin