Order Products : sales@su-jiao.com
Adiprene® Duracast® S850
| Category: | PUR-Ester/MDI , Polyurethane (Polyester, MDI) |
| Manufacturer: | Chemtura |
| Trademark: | Adiprene® Duracast® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GKHLfb_Adiprene-Duracast-S850.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ADIPRENE DURACAST S850 is an MDI-terminated polyester prepolymer having low free MDI content. A high performance 85A elastomer with excellent physical properties is obtained when this prepolymer is chain extended with DURACURE™ C3 or C3-LF. Other advantages are improved processing characteristics and easier management of health & safety during handling. The unique combination of properties exhibited by low free MDI prepolymers is superior to those available from TDI and conventional MDI prepolymers. DURACAST prepolymers cured with DURACURE C3 or C3-LF provide a superior hard segment and offer unique processing and productivity improvements. This high performance hard segment offers excellent physical and engineering properties, including high cut and tear resistance, improved flex fatigue, low temperature flexibility, excellent dynamics (at both low and high temperatures) and other high temperature properties. Traditionally, amine cures could not be used with MDI prepolymers due to high reactivity (short pot life) even though they offer some performance advantages such as high temperature resistance and tear properties. It also offers EH&S advantages as it is based on low free monomer technology and is a MBOCA free system. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 1.15 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness 2(Shore A) | 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss - Relative vol loss | |||
| -- 3 | 13.0 | mm³ | |
| -- 4 | 11.0 | mm³ |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rebound Resilience - Drop Ball | |||
| -- 5 | 64 | % | |
| -- 6 | 64 | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Abrasion Index | |||
| DIN 7 | 1270 | ||
| DIN 8 | 1100 | ||
| NBS 9 | 1400 | % | |
| NBS 10 | 1300 | % |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Trouser Tear Resistance | ASTM D1938 | ||
| -- 11 | 43.8 | N/mm | |
| -- 12 | 26.3 | N/mm |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain 13 | 4.43 | MPa | |
| 100% Strain 14 | 4.10 | MPa | |
| 300% Strain 15 | 7.54 | MPa | |
| 300% Strain 16 | 6.21 | MPa | |
| Tensile Strength | ASTM D412 | ||
| -- 17 | 39.9 | MPa | |
| -- 18 | 33.3 | MPa | |
| Tensile Elongation | ASTM D412 | ||
| Break 19 | 630 | % | |
| Break 20 | 550 | % | |
| Tear Strength | |||
| -- | 71.8 | kN/m | ASTM D624 |
| -- | 69.2 | kN/m | ASTM D624 |
| Split 21 | 17 | kN/m | ASTM D470 |
| Split 22 | 22 | kN/m | ASTM D470 |
| Compression Set | ASTM D395B | ||
| 70°C, 22 hr 23 | 24 | % | |
| 70°C, 22 hr 24 | 23 | % | |
| 100°C, 22 hr 25 | 42 | % | |
| 100°C, 22 hr 26 | 44 | % | |
| Bayshore Resilience | ASTM D2632 | ||
| -- 27 | 52 | % | |
| -- 28 | 57 | % |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life (70°C) | 240 to 360 | min | |
| Demold Time | |||
| 120°C | 20 | min | |
| 140°C | 10 | min | |
| Post Cure Time | |||
| 120°C 29 | 16 to 24 | hr | |
| 140°C 30 | 16 to 24 | hr |
| Note Message | |
|---|---|
| 1 . | Post cure 140°C (24 hrs.) |
| 2 . | Post cure 140°C (24 hrs.) |
| 3 . | Post cure 120°C (24 hrs.) |
| 4 . | Post cure 140°C (24 hrs.) |
| 5 . | Post cure 120°C (24 hrs.) |
| 6 . | Post cure 140°C (24 hrs.) |
| 7 . | Post cure 140°C (24 hrs.) |
| 8 . | Post cure 120°C (24 hrs.) |
| 9 . | Post cure 140°C (24 hrs.) |
| 10 . | Post cure 120°C (24 hrs.) |
| 11 . | Post cure 140°C (24 hrs.) |
| 12 . | Post cure 120°C (24 hrs.) |
| 13 . | Post cure 140°C (24 hrs.) |
| 14 . | Post cure 120°C (24 hrs.) |
| 15 . | Post cure 140°C (24 hrs.) |
| 16 . | Post cure 120°C (24 hrs.) |
| 17 . | Post cure 140°C (24 hrs.) |
| 18 . | Post cure 120°C (24 hrs.) |
| 19 . | Post cure 140°C (24 hrs.) |
| 20 . | Post cure 120°C (24 hrs.) |
| 21 . | Post cure 120°C (24 hrs.) |
| 22 . | Post cure 140°C (24 hrs.) |
| 23 . | Post cure 140°C (24 hrs.) |
| 24 . | Post cure 120°C (24 hrs.) |
| 25 . | Post cure 140°C (24 hrs.) |
| 26 . | Post cure 120°C (24 hrs.) |
| 27 . | Post cure 120°C (24 hrs.) |
| 28 . | Post cure 140°C (24 hrs.) |
| 29 . | Standard |
| 30 . | High Performance |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Etinox® EK-5910 | Ercros, S.A. | PVC, Flexible | Etinox® |
| Ingeo™ 4032D | NatureWorks® LLC | PLA | Ingeo™ |
| Innothane® IE-6000 | Innovative Polymers, Inc. | TSU | Innothane® |
| Hostacom PPU X9067HS 104908 | LyondellBasell Industries | PP Copolymer | Hostacom |
| ROTOLENE® Black Total Plus | Polimeros Mexicanos S.A. de C.V. | LMDPE | ROTOLENE® |
