Order Products : sales@su-jiao.com

Rigidex® P CAP906S

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	Rigidex® P
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GGGpXu_Rigidex-P-CAP906S.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Rigidex® P CAP906S is an impact copolymer polypropylene suitable for closures requiring good impact performance, especially at low temperature, balanced with low tendency to stress whitening. It is specifically designed and formulated for bi-component screw caps for carbonated soft drinks made by either injection or compression moulding. Typical applications closures requiring good impact performances- especially at low temperature - and easy application and opening torqu bi-component screw caps for carbonated soft drinks Benefits and Features Good processability High impact strength Low tendency to exhibit stress whitening Grade containing slip agent for easy opening Good mould release

Message

Rigidex® P CAP906S is an impact copolymer polypropylene suitable for closures requiring good impact performance, especially at low temperature, balanced with low tendency to stress whitening. It is specifically designed and formulated for bi-component screw caps for carbonated soft drinks made by either injection or compression moulding.

Typical applications

closures requiring good impact performances- especially at low temperature - and easy application and opening torqu

bi-component screw caps for carbonated soft drinks

Benefits and Features

Good processability

High impact strength

Low tendency to exhibit stress whitening

Grade containing slip agent for easy opening

Good mould release

General Information
Additive	Slip
Features	Good Mold Release Good Processability High Impact Resistance Impact Copolymer Low Temperature Impact Resistance Slip Stress Whitening Resistant
Uses	Caps Closures
RoHS Compliance	Contact Manufacturer
Processing Method	Compression Molding Injection Molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	6.0	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)	30.0	MPa	ISO 527-2
Flexural Modulus (23°C)	1500	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
0°C	4.0	kJ/m²
23°C	6.0	kJ/m²

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	110	°C	ISO 75-2/B

Resin Grade	Manufacturer	Category	Trademark
Tenac™-C 8520	Asahi Kasei Chemicals Corporation	Acetal (POM) Copolymer	Tenac™-C
UNITHENE® LH506	USI Corporation	HDPE	UNITHENE®
Laser+® (B90B)	DAK Americas LLC	PET	Laser+®
THERMOLAST® V TV7VAZ (Series: LTP/PA)	KRAIBURG TPE	TPE	THERMOLAST® V
Starex NH-0825 S	LOTTE ADVANCED MATERIALS CO., LTD.	ABS	Starex