Order Products : sales@su-jiao.com
Generic PPE+PS - Carbon Fiber
| Category: | PPE+PS , Polyphenylene Ether + PS |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GG6Wly_Generic-PPE-PS---Carbon-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PPE+PS - Carbon Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.918 - 1.28 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.10 - 0.20 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 45.5 - 167 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 1.0 - 4.2 | % | ASTM D638 |
| Flexural Modulus (23°C) | 6000 - 15900 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 43 - 70 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 100 - 240 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 98.9 - 178 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 93.3 - 172 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+3 - 2.5E+5 | ohms | ASTM D257 |
| Volume Resistivity (23°C) | 0.30 - 5.1E+4 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.6 - 121 | °C | |
| Drying Time | 3.0 - 4.5 | hr | |
| Rear Temperature | 232 - 307 | °C | |
| Middle Temperature | 232 - 313 | °C | |
| Front Temperature | 232 - 317 | °C | |
| Processing (Melt) Temp | 268 - 320 | °C | |
| Mold Temperature | 65.6 - 113 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PPE+PS - Carbon FiberThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 205.3 MS | RTP Company | Nylon 66 | RTP |
| TECHNO ABS F5170 | Techno Polymer Co, Ltd. | ABS | TECHNO ABS |
| NEOPLAST 180 HOFR | Zylog Plastalloys | TPV | NEOPLAST |
| Hylex® P1017 L2 HB | Entec Polymers | PC | Hylex® |
| Lifoflex® GB 1030 | Müller Kunststoffe GmbH | SEBS | Lifoflex® |
