Order Products : sales@su-jiao.com
Delta HDPE 5508
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Delta Polymers |
| Trademark: | Delta |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GG0aFb_Delta-HDPE-5508.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Delta HDPE 5508 is a High Density Polyethylene product. It is available in North America. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.953 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 26.2 | MPa | ASTM D638 |
| Flexural Modulus | 1030 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 26.2 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 140 | J/m | ASTM D256 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Burning Rate | < 100 | mm/min | ISO 3795 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Stanyl® ForTii™ F11 | DSM Engineering Plastics | Nylon 4T | Stanyl® ForTii™ |
| CompaMid® PA 6.6 | DimeLika Plast GmbH | Nylon 66 | CompaMid® |
| INEOS PP L24G-00 | INEOS Olefins & Polymers USA | PP Impact Copolymer | INEOS PP |
| INNOPOL® PP CS 2-9524 | Inno-Comp Ltd. | PP Copolymer | INNOPOL® PP |
| Perfactory® Photosilver | EnvisionTEC, Inc. | Acrylic, Unspecified | Perfactory® |
