Order Products : sales@su-jiao.com
Starglas FF004
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Eurostar Engineering Plastics |
| Trademark: | Starglas |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GEQbO3_Starglas-FF004.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Starglas FF004 is a Glass Fiber Reinforced High Density Polyethylene Resin |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.10 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow (4.00 mm) | 1.4 | % | Internal Method |
| Water Absorption (23°C, 24 hr) | 0.010 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3500 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield) | 46.0 | MPa | ISO 527-2/5 |
| Tensile Strain (Yield) | 5.0 | % | ISO 527-2/5 |
| Flexural Modulus 1 | 3100 | MPa | ISO 178 |
| Flexural Stress | 60.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength 2(23°C) | 11 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength 3(23°C) | 35 | kJ/m² | ISO 180/1U |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 4(1.8 MPa, Unannealed, 64.0 mm Span) | 88.0 | °C | ISO 75-2/Af |
| CLTE | ISO 11359-2 | ||
| Flow : 23 to 60°C | 4.5E-5 | cm/cm/°C | |
| Transverse : 23 to 60°C | 1.6E-4 | cm/cm/°C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Rear Temperature | 195 to 205 | °C | |
| Middle Temperature | 210 to 220 | °C | |
| Front Temperature | 220 to 230 | °C | |
| Processing (Melt) Temp | 230 | °C | |
| Mold Temperature | 40.0 to 55.0 | °C |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | 80*10*4 |
| 3 . | 80*10*4 |
| 4 . | 80*10*4 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SHIN-A SEC-4345M70 | SHIN-A T&C | Epoxy | SHIN-A |
| THERMOLAST® K TC4CSN (Series: CS) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Formolene® 6520N | Formosa Plastics Corporation, U.S.A. | PP Impact Copolymer | Formolene® |
| MAJORIS BGR304 | AD majoris | PP, Unspecified | MAJORIS |
| Sylvin 8200-88C Green 3208 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
