Order Products : sales@su-jiao.com

KMI PP KM-023IB

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	KMI Group, Inc.
Trademark:	KMI PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GEQ4GO_KMIPPKM023IB.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
KM-023IB is a high impact and stiffness PP for injection molding applications with excellent impact strength and high stiffness. This grade shows high falling weight impact at low temperature and good UV stability. It is suitable for carte box, pallet and applications which need the high impact strength/stiffness balance. Food Contact Application: KM-023IB meets the FDA requirements in the Code of Federal Regulations in CFR 177.1520 for food contact. Characteristics: Excellent stiffness/impact balance High falling weigh impact at low temperature

Message

KM-023IB is a high impact and stiffness PP for injection molding applications with excellent impact strength and high stiffness. This grade shows high falling weight impact at low temperature and good UV stability. It is suitable for carte box, pallet and applications which need the high impact strength/stiffness balance.

Food Contact Application:
KM-023IB meets the FDA requirements in the Code of Federal Regulations in CFR 177.1520 for food contact.

Characteristics:

Excellent stiffness/impact balance

High falling weigh impact at low temperature

General Information
Features	Block Copolymer Rigidity, high Impact resistance, high Good UV resistance Low temperature impact resistance Compliance of Food Exposure
Uses	Pallets
Agency Ratings	FDA 21 CFR 177.1520
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.910	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	5.0	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	28.4	MPa	ASTM D638
Tensile Elongation (Break)	400	%	ASTM D638
Flexural Modulus	1320	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Unnotched Izod Impact (23°C)	> 390	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Heat Distortion	115	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
Witcom PC/ABS AS-S-LM	Witcom Engineering Plastics B.V.	PC+ABS	Witcom PC/ABS
Axiall PVC 19451	Axiall Corporation	PVC, Flexible	Axiall PVC
DOWLEX™ IP 20	The Dow Chemical Company	LLDPE	DOWLEX™
K-Flex 3360 OR	Technovinyl Polymers India Ltd.	PVC Elastomer	K-Flex
Hyundai EP Adhesives LE200TS/5900	HYUNDAI EP Co., Ltd.	PE, Unspecified	Hyundai EP Adhesives