Order Products : sales@su-jiao.com
ALCUDIA® HDPE 53070
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | REPSOL |
| Trademark: | ALCUDIA® HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GEDqUY_ALCUDIA-HDPE-53070.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ALCUDIA® 53070 is a high-density polyethylene copolymer of hexene, with high molecular weight. It is especially designed to make, by blow moulding, tanks of medium and high capacity. Also for thermoforming sheets. This grade contains stabilisers according to the end-use of the item in order to reinforce the thermal and light stability. It has an excellent environmental stress cracking resistance (ESCR) It has an excellent stiffness and impact resistance, and high chemical resistance, so it's recommended to Jerrican containers. TYPICAL APPLICATIONS Blow moulding of jerrican containers. Recommended melt temperature range from 180 to 210°C. Processing conditions should be optimised for each production line. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 0.954 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/21.6 kg | 6.7 | g/10 min | |
| 190°C/5.0 kg | 0.30 | g/10 min | |
| Environmental Stress-Cracking Resistance (50°C, 10% Igepal, F50) | > 190 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 63 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield | 25.0 | MPa | |
| Break | 35.0 | MPa | |
| Tensile Strain (Break) | 950 | % | ISO 527-2 |
| Flexural Modulus | 1250 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 128 | °C | ISO 306/A |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 180 to 210 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 801 TFE 20 SI 2 | RTP Company | Acetal (POM) Copolymer | RTP |
| Silamid® SV30 | Roonamid a.s. | Nylon 6 | Silamid® |
| Moplen HP502H | Shazand (Arak) Petrochemical Corporation | PP Homopolymer | Moplen |
| Adell Polyamide AI-30 | Adell Plastics, Inc. | Nylon 66 | Adell Polyamide |
| ColorFast® FRA205 | LTL Color Compounders, Inc. | ABS | ColorFast® |
