Order Products : sales@su-jiao.com
Epolene® E-14P
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Epolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GDruZO_Epolene-E-14P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| The Epolene E-14P is a low molecular-weight, low-density, oxidized polyethylene powder. It is useful as a lubricant in processing rigid and flexible polyvinyl chloride (PVC) and as a processing aid for preparing color concentrates. Epolene E-14P is listed with the National Sanitation Foundation (NSF) under Standard 61 Drinking Water System Components Health Effects. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Acid Number | 17.00 | mg KOH/g | |
| Molecular Weight 1 | 4000 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ring and Ball Softening Point | 104 | °C | ASTM E28 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Penetration Hardness 2(25°C) | 400 | mm | ASTM D5 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (125°C) | 375 | mPa·s |
| Note Message | |
|---|---|
| 1 . | Molecular weight measured via Gel Permeation Chromatography (GPC) using polystyrene standards |
| 2 . | Needle under 100-g load for 5s, tenths of mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Pro-fax 8623 | LyondellBasell Industries | PP Impact Copolymer | Pro-fax |
| RAMTOUGH PZ320G2 | Polyram Ram-On Industries | PC | RAMTOUGH |
| ALTECH® PP-H A 2020/100 GF20 | ALBIS PLASTIC GmbH | PP Homopolymer | ALTECH® PP-H |
| Clear Cote™ Clear Casting Resin | Club Kit, Inc. | Polyester, TP | Clear Cote™ |
| KOPA® KN333G30HS | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
