Order Products : sales@su-jiao.com

Bynel® 4105

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	DuPont Packaging & Industrial Polymers
Trademark:	Bynel®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GCMcH7_Bynel-4105.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

BYNEL® Series 4100 series resins are anhydride-modified, linear low-density polyethylene (LLDPE) resins. All BYNEL Series 4100 series resins are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene resins.

BYNEL 4100 series resins adhere to a variety of materials. They are most often used to adhere to EVOH, polyamide, PE and ethylene copolymers.
Series 4100 resins can be used in coextrusion processes including:

blown film

cast film/sheet

blow molding

melt and solid phase thermoforming

sheet and tubing

LLDPE resins are known for their temperature resistance, clarity and toughness.
These physical properties make the 4100 series resins work well in applications such as:

boil-in-bag structures

blow molded containers in which drop strength is important

bag-in-box films

film where LLDPE is the heat seal layer.

General Information
Features	Good adhesion
Uses	Films Blow molding applications Pipe fittings Sheet
Agency Ratings	FDA 21 CFR 175.105
Forms	Particle
Processing Method	Film extrusion Blow molding Co-extrusion molding Extrusion Sheet extrusion molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.930	g/cm³	ASTM D792, ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	4.5	g/10 min	ASTM D1238, ISO 1133

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	105	°C	ASTM D1525, ISO 306
Melting Temperature (DSC)	125	°C	ASTM D3418, ISO 3146
Freezing Point
--	110	°C	ISO 3146
--	110	°C	ASTM D3418

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	160	°C
Cylinder Zone 2 Temp.	185	°C
Cylinder Zone 3 Temp.	235	°C
Cylinder Zone 4 Temp.	260	°C
Cylinder Zone 5 Temp.	260	°C
Adapter Temperature	260	°C
Melt Temperature	< 260	°C
Die Temperature	260	°C

Extrusion instructions
Processing conditions shown are for coextrusion with nylon.

Resin Grade	Manufacturer	Category	Trademark
Radilon® S 35VHS 338 E NER	Radici Plastics	Nylon 6	Radilon®
SUSTAPVDF ESD 60	Röchling Sustaplast SE & Co. KG	PVDF	SUSTAPVDF
Geon™ Vinyl Dry Blend E3363	PolyOne Corporation	PVC, Rigid	Geon™ Vinyl Dry Blend
Huafon JF-W-3045	Huafon Group Co., Ltd.	PUR, Unspecified	Huafon
Kumho KNB 25LM	Korea Kumho Petrochemical Co., Ltd.	NBR	Kumho KNB