Order Products : sales@su-jiao.com
Forprene® 6SD001A30
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Forprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GAGHOZ_Forprene-6SD001A30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Forprene® 6SD001A30 is a Thermoplastic Vulcanizate (TPV) material. It is available in Europe, Latin America, or North America for injection molding. Primary attribute of Forprene® 6SD001A30: REACH Compliant. |
| General Information | |
|---|---|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 28 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | 4 | % | ASTM D412 |
| Tensile Stress 1(100% Strain) | 0.900 | MPa | ASTM D412 |
| Tensile Strength 2 | 2.00 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 400 | % | ASTM D412 |
| Tear Strength 4 | 9.00 | kN/m | ASTM D624 |
| Compression Set 5(70°C, 22 hr) | 25 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 150 | °C | |
| Middle Temperature | 160 | °C | |
| Front Temperature | 170 | °C | |
| Nozzle Temperature | 175 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Die C |
| 3 . | Die C |
| 4 . | Die C |
| 5 . | Type 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tectron H2244 | TECTRON Systems Pte Ltd | TPV | Tectron |
| Yanshan PS 688B | SINOPEC Beijing Yanshan Petrochemical | PS (GPPS) | Yanshan PS |
| Fainplast PVC HGKA 0183 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| LUVOCOM® 1100-8721/EM/BK | Lehmann & Voss & Co. | PESU | LUVOCOM® |
| ULTEM™ DH1004 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
