Order Products : sales@su-jiao.com
Ferro PP CPP30GF33BK
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Ferro Corporation |
| Trademark: | Ferro PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GABtGP_Ferro-PP-CPP30GF33BK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Meets/Exceeds Ford Engineering Specification WSS-M4D927-A. Primary end use is for blower wheels. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.15 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 7.6 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.2 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, 23°C) | 33.1 | MPa | ISO 527-2 |
| Flexural Modulus - Tangent | 2600 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180 | ||
| -40°C | 2.1 | kJ/m² | ISO 180 |
| 23°C | 3.1 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 119 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 70.0 | °C | ISO 75-2/A |
| Additional Information |
|---|
| Tensile/Izod Change, ISO 188, 1000 hours, 140°C: -5%/-9% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sanren F800E (1st-grade) | SINOPEC Shanghai Petrochemical Co. Ltd. | PP Random Copolymer | Sanren |
| Glastic® 1403 | Bulk Molding Compounds, Inc. | Polyester, TS | Glastic® |
| HiFill® PA6 GF/M40 HS L | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| HIVAL® 1609 NAT | Nexeo Solutions, LLC. | Acetal (POM) Copolymer | HIVAL® |
| TechnoFiber PP LGF 40-10-01 H | TechnoCompound GmbH | PP, Unspecified | TechnoFiber |
