EVERCAP™ DMDA-1260 NT 7

Category: HDPE , High Density Polyethylene Resin
Manufacturer: The Dow Chemical Company
Trademark: EVERCAP™
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: G9pUCF_EVERCAPDMDA1260NT7.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
EVERCAP™ DMDA-1260 NT 7 High Density Polyethylene Resin (HDPE) enables the right performance properties to meet demanding closure and fitment application needs. It is intended for use in compression and injection molded one piece beverage closures designed primarily for applications that undergo hot fill or aseptic sterilization processes. EVERCAP™ DMDA-1260 offers improved performance for injection molded fitments designed for fitted pouches where its balance of properties are desired. EVERCAP™ DMDA-1260 delivers a combination of improved properties such as improved stiffness, higher heat deflection temperature, improved ESCR, gaseous barrier, and easy processing versus alternative HDPE systems typically used for hot fill and aseptic sterilization processes. The end result is the ability to light weight closures that are s are longer term closure performance, easy opening closures without the use of slip agent and consistent processing. for aseptic applications where an acid wash can remove the slip agent and potentially plug wash water filters.

Targeted Applications and Product Main Characteristics:
  • Compression and Injection Molded Light Weight Aseptic or Hot Fill Beverage Closures
  • Controlled Removal Torques without Slip for Aseptic Applications
  • Excellent Stiffness, ESCR, Gaseous Barrier and Impact Strength
  • Excellent Sensory Properties
  • Excellent Processing Characteristics
  • High Heat Deflection Temperature
  • Controlled Sensory Properties

Complies with:
  • U.S. FDA 21 CFR 177.1520(c)3.2a
  • Europe Commission Regulation (EU) No 10/2011
Consult the regulations for complete details.
General Information
Agency Ratings
  • FDA 21 CFR 177.1520(c) 3.2a
  • Europe No 10/2011
Forms
  • Particle
PhysicalNominal ValueUnitTest Method
Specific Gravity 0.965g/cm³ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)2.7g/10 minASTM D1238
Environmental Stress-Cracking Resistance ASTM D1693
    50°C, 10% Igepal, F50 28.0hrASTM D1693
    50°C, 100% Igepal, F50 35.0hrASTM D1693
HardnessNominal ValueUnitTest Method
Durometer Hardness (Shore D)60ASTM D2240
MechanicalNominal ValueUnitTest Method
Tensile Strength ASTM D638
    Yield 29.6MPaASTM D638
    Fracture 20.7MPaASTM D638
Tensile Elongation ASTM D638
    Yield 7.0%ASTM D638
    Fracture 700%ASTM D638
Flexural Modulus - 2% Secant 1410MPaASTM D790B
ThermalNominal ValueUnitTest Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)79.4°CASTM D648
Vicat Softening Temperature 131°CASTM D1525
Melting Temperature (DSC) 135°CInternal method
Peak Crystallization Temperature (DSC) 118°CInternal method
Additional Information
Plaque molded and tested in accordance with ASTM D 4976.
Resin Grade Manufacturer Category Trademark
Ultradur® B 4300 G6 High Speed BASF Corporation PBT Ultradur®
Fainplast PVC GS 69/PL Fainplast Compounds S.r.l PVC, Unspecified Fainplast PVC
Ferro PP TPO20AT19GY Ferro Corporation PP, Unspecified Ferro PP
Elastron® D D400.A30.N Elastron USA, Inc. SBS Elastron® D
KYOCERA KE-4200 KYOCERA Chemical Corporation Epoxy KYOCERA