Order Products : sales@su-jiao.com
Comco PEI
| Category: | PEI , Polyether Imide |
| Manufacturer: | Comco Nylon GmbH |
| Trademark: | Comco |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G7lMoB_ComcoPEI.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Application examples: Components for the electrical and electronics industries as well as for medical devices etc. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Resin ID (ISO 1043) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.27 | g/cm³ | ISO 1183 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.50 | % | ISO 62 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 86 | DIN 53505 | |
| Ball Indentation Hardness | 220 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3100 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 110 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 12 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 4.0 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 200 | °C | ISO 75-2/A |
| Specific Heat | 1100 | J/kg/°C | DIN 52612 |
| Thermal Conductivity | 0.24 | W/m/K | DIN 52612 |
| Service Temperature | |||
| Long Term | -50 - 170 | °C | |
| Short Term | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+15 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+17 | ohms·cm | IEC 60093 |
| Dielectric Strength | 30 | kV/mm | IEC 60243-1 |
| Dielectric Constant (100 Hz) | 3.20 | IEC 60250 | |
| Dissipation Factor (100 Hz) | 1.5E-3 | IEC 60250 | |
| Comparative Tracking Index (Solution A) | 150 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 3.0 mm | V-0 | UL 94 | |
| 6.0 mm | V-0 | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TOLEN H060 GP | SIBUR, LLC | PP Homopolymer | TOLEN |
| UMG ALLOY® TA-15W | UMG ABS, Ltd. | ASA+PC | UMG ALLOY® |
| UNISOFT TPE™ ST-93A-CL-1-01 | UNITED SOFT PLASTICS, Inc. | SEBS | UNISOFT TPE™ |
| Bergamid™ A700 G25 U-SO | PolyOne Corporation | Nylon 66 | Bergamid™ |
| Daelim Po1y® PP-172 | DAELIM INDUSTRIAL CO., LTD. | PP Homopolymer | Daelim Po1y® |
