Order Products : sales@su-jiao.com
ADMER™ NF408E
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | Mitsui Chemicals Europe GmbH |
| Trademark: | ADMER™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G7NgmY_ADMER-NF408E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ADMER® NF408E is a maleic anhydride grafted, PE-based adhesive resin designed for adhesion to PA or EVOH in bottle, sheet and blow film applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.6 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 50 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 9.80 | MPa | |
| Break | 24.0 | MPa | |
| Tensile Elongation (Break) | > 500 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (Area) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 100 | °C | ASTM D1525 |
| Peak Melting Temperature | 121 | °C | ASTM D3418 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premi-Glas® 1200H-20 | Premix, Inc. | TS, Unspecified | Premi-Glas® |
| MORETEC™ 0248CN | Prime Polymer Co., Ltd. | LLDPE | MORETEC™ |
| FERREX® GPP20CC56HB BLUE | Ferro Corporation | PP Homopolymer | FERREX® |
| DURANEX® CRN7015GP | Polyplastics Co., Ltd. | PBT | DURANEX® |
| 3M™ Dyneon™ Fluoroelastomer FT 2481 | 3M Advanced Materials Division | Fluorelastomer | 3M™ Dyneon™ Fluoroelastomer |
