Order Products : sales@su-jiao.com
Synthos PS GP 585X
| Category: | PS (GPPS) , General Purpose Polystyrene |
| Manufacturer: | Synthos S.A. |
| Trademark: | Synthos PS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G7BW2Z_Synthos-PS-GP-585X.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SYNTHOS PS GP 585X is general purpose polystyrene (GPPS) of excellent heat resistance and good rheological properties. It is a thermoplastic material designed for extrusion, thermoforming and injection moulding. Product has a form of cylindrical granules of diameter 2.5 to 6 mms. SYNTHOS PS GP 585X contains no internal lubricants. APPLICATION Injection moulding is used to produce parts with increased thermal resistance. Production of XPS sheets and plates by means of direct extrusion and blowing. It is suitable for blending with high-impact polystyrene (HIPS) and SBS copolymers to increase the thermal resistance of the product e.g. cups for hot drinks. The composition of the polymer meets the requirements of the Health and can therefore be used for the production of articles coming into contact with food. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 7.5 to 8.5 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.20 to 0.50 | % | Internal Method |
| Particle Size | 2.50 to 6.00 | mm |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Residual Styrene | 0.020 | % | Internal Method |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength (23°C) | 9.0 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 99.0 | °C | ISO 306/B50 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.60 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | |||
| Desiccant Dryer | 80.0 | °C | |
| Hot Air Dryer | 70.0 | °C | |
| Drying Time | |||
| Desiccant Dryer | 1.0 | hr | |
| Hot Air Dryer | 2.0 to 4.0 | hr | |
| Processing (Melt) Temp | 180 to 260 | °C | |
| Mold Temperature | 10.0 to 60.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 200 to 240 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2181 TFE 15 SI 2 | RTP Company | PEI | RTP |
| RTP 303 TFE 10 FR | RTP Company | PC | RTP |
| BRALEN® SA 70-21 | Slovnaft Petrochemicals, s.r.o. | LDPE | BRALEN® |
| Dryflex® CS 70A001N | ELASTO | SEBS | Dryflex® |
| EMERGE™ PC 8701 | Trinseo | PC | EMERGE™ |
