Order Products : sales@su-jiao.com
ESTADIENE 2506
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Cossa Polimeri S.r.l. |
| Trademark: | ESTADIENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G6TsRO_ESTADIENE-2506.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ESTADIENE 2506 is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Europe. Typical application: Sheet. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 6.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 to 0.70 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 36.0 | MPa | |
| Break | 23.0 | MPa | |
| Tensile Elongation (Break) | 20 | % | ASTM D638 |
| Flexural Modulus | 2200 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| 0°C | 300 | J/m | |
| 23°C | 350 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | |||
| -- | 114 | °C | ASTM D1525 1 |
| -- | 102 | °C | ASTM D1525 2 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | HB | ||
| 3.20 mm | HB | ||
| Glow Wire Ignition Temperature (2.00 mm) | 650 | °C | IEC 60695-2-13 |
| Note Message | |
|---|---|
| 1 . | Rate A (50°C/h), Loading 1 (10 N) |
| 2 . | Rate A (50°C/h), Loading 2 (50 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4285 TFE 15 | RTP Company | PI, TP | RTP |
| Premi-Glas® 1201-20 | Premix, Inc. | TS, Unspecified | Premi-Glas® |
| Mirakutoran® TPU K25MPSJW | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| Wondel® P PG8 | Nanjing Julong Engineering Plastics Co., LTD | PP, Unspecified | Wondel® P |
| EPIMIX PBT/PET GFR 30 NC | EPSAN Plastik SAN. ve TiC. A.S. | PBT+PET | EPIMIX |
