Order Products : sales@su-jiao.com
SABIC® LDPE 2102X3
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G5mGHe_SABIC-LDPE-2102X3.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® LDPE 2102X3 is an Ultra Melt Strength (UMS) grade typically used in foam applications. Application SABIC® LDPE 2102X3 can be typically used for all types of foam, produced with chemical blowing agents or physical gases, X-linked and non X-linked. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.921 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.5 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 45 | ISO 868 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 250 | MPa | Internal Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 89.0 | °C | ISO 306/A |
| Melting Temperature (DSC) | 108 | °C | DIN 53765 |
| Peak Crystallization Temperature (DSC) | 96.0 | °C | DIN 53765 |
| Heat of Fusion | 108 | J/g | DIN 53765 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Telcar® TL-2580F | Teknor Apex Company | TPE | Telcar® |
| SUMIKASUPER® LCP E6809T | Sumitomo Chemical Co., Ltd. | LCP | SUMIKASUPER® LCP |
| TOTAL Polyethylene HDPE XS 10 YS | TOTAL Refining & Chemicals | HDPE | TOTAL Polyethylene |
| Adiprene® Duracast® E530 D | Chemtura | PUR-Ether/MDI | Adiprene® Duracast® |
| Paracril® 3350EP | INSA | NBR | Paracril® |
