Order Products : sales@su-jiao.com
BJB Silicone TC-5015 A/B
| Category: | Silicone , Silicone |
| Manufacturer: | BJB Enterprises, Inc. |
| Trademark: | BJB Silicone |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G4rMtD_BJB-Silicone-TC-5015-A-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TC-5015 A/B is a room temperature, addition/platinum curing silicone rubber designed for making molds and parts. When used to make molds, the TC-5015 A/B is translucent enough to see-through when casting into the mold cavity. This aids in developing void free surfaces on the casting. TC-5015 A/B is also commonly used to make ink stamp pads as well as other types of pressure pads. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- 1 | 0.968 | g/cm³ | |
| -- 2 | 1.07 | g/cm³ | |
| -- | 1.06 | g/cm³ | ASTM D792 |
| Shrinkage | Nil | ASTM D2566 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gel Time | 30.0 | min | |
| Work Time | 25.0 | min |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 10 to 20 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 2.21 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 350 | % | ASTM D412 |
| Tear Strength | 10.5 | kN/m | ASTM D624 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100 | ||
| Part B | Mix Ratio by Weight: 10 | ||
| Shelf Life | 26 | wk | |
| Thermoset Mix Viscosity | Brookfield | ||
| 25°C 3 | 31000 | cP | |
| 25°C 4 | 80.0 | cP | |
| 25°C | 15000 | cP | |
| Demold Time (25°C) | 1400 | min |
| Note Message | |
|---|---|
| 1 . | Part B |
| 2 . | Part A |
| 3 . | Part A |
| 4 . | Part B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 299 A X 97793 | RTP Company | Nylon 6 | RTP |
| SLOVAMID® 6 GF 25 FRA 5 LS | Plastcom | Nylon 6 | SLOVAMID® 6 |
| VENYL UG301 - 8070 | AD majoris | Nylon 66 | VENYL |
| ALCOM® TCD PA66 5040 14015 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® TCD PA66 |
| DENILEN B 3010 CB | Vamp Tech | PP, Unspecified | DENILEN |
