Order Products : sales@su-jiao.com

THERMOLAST® K TC5PAZ (Series: AD/PA)

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	KRAIBURG TPE
Trademark:	THERMOLAST® K
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	G4PWXZ_THERMOLAST-K-TC5PAZ-Series-AD-PA-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The AD/PA Series is your material solution for applications with excellent adhesion to PA. The compounds are available in natural and black colors.

Typical applications

Cable clips

Function and design elements

Grommets

Handles (hand tools and power tools etc.)

Seals

Thumb wheels

Material advantages

Adhesion to PA6 and PA6.6 up to 50 % glass fiber

Easy coloring (compounds in natural colors)

Excellent adhesion

Excellent processing behavior

Insert molding possible

Pleasant surface feel (Soft touch)

UL 94 HB listed

Wide hardness range 25-80 Sh A

General Information
Features	Good Adhesion Good Processability Soft
Uses	Grommets Handles Seals
Appearance	Black
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.15	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	48		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(Yield)	2.50	MPa	ISO 37
Tensile Elongation ²(Break)	450	%	ISO 37
Tear Strength ³	13	kN/m	ISO 34-1
Compression Set ⁴			ISO 815
23°C, 72 hr	33	%
70°C, 24 hr	79	%
100°C, 24 hr	80	%

Flammability	Nominal Value		Test Method
Flame Rating	HB		UL 94

Additional Information	Nominal Value	Unit	Test Method
Adhesion to PA6	13.5	kN/m	Renault D41/1916
Adhesion to PA66	10.0	kN/m	Renault D41/1916

Injection	Nominal Value	Unit
Drying Temperature	60.0 to 80.0	°C
Drying Time	2.0 to 4.0	hr
Rear Temperature	230 to 245	°C
Middle Temperature	250 to 260	°C
Front Temperature	260 to 270	°C
Mold Temperature	40.0 to 60.0	°C
Injection Pressure	20.0 to 100	MPa
Back Pressure	2.00 to 10.0	MPa

Note Message
1 .	Type S2, 200 mm/min
2 .	Type S2, 200 mm/min
3 .	Method Bb, Angle (Nicked)
4 .	Method A

Resin Grade	Manufacturer	Category	Trademark
Spartech Polycom SC1-1230	Spartech Polycom	ABS	Spartech
4MID® 9B22150	4Plas	Nylon 6	4MID®
Delta ATR-2G40	Delta Polymers	Acetal (POM) Copolymer	Delta
Hanwha Total PE P110BL	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	HDPE	Hanwha Total PE
ALFATER XL® A55I 4PA0001	ALBIS PLASTIC GmbH	TPV	ALFATER XL®