Order Products : sales@su-jiao.com

CYCOLOY™ C6600 resin

Category:	PC+ABS , Polycarbonate + ABS
Manufacturer:	SABIC Innovative Plastics Asia Pacific
Trademark:	CYCOLOY™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	G3wwim_CYCOLOYC6600resin.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message
Nonbrominated, nonchlorinated FR PC+ABS with balanced flow, impact and hydrolytic stability for a wide variety of applications including business equipment, monitors, enclosures, among others.

General Information
Additive	Flame retardancy
Features	Chlorine Free Impact resistance, good Good liquidity Hydrolysis stability Bromine-free Flame retardancy
Uses	Business equipment
Processing Method	Injection molding
Multi-Point Data	Coefficient of Thermal Expansion vs. Temperature (ASTM E831) Flexural DMA (ASTM D4065) Pressure-Volume-Temperature (PVT - Zoller Method) Shear DMA (ASTM D4065) Specific Heat vs. Temperature (ASTM D3417) Tensile Fatigue Tensile Stress vs. Strain (ASTM D638) Thermal Conductivity vs. Temperature (ASTM E1530) Viscosity vs. Shear Rate (ASTM D3835)

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.19	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (260°C/2.16 kg)	22	g/10 min	ASTM D1238
Molding Shrinkage - Flow (3.20 mm)	0.40 - 0.60	%	Internal method
Water Absorption (24 hr)	0.11	%	ASTM D570

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus ¹	3000	MPa	ASTM D638
Tensile Strength ²			ASTM D638
Yield	63.0	MPa	ASTM D638
Fracture	49.0	MPa	ASTM D638
Tensile Elongation ³			ASTM D638
Yield	4.0	%	ASTM D638
Fracture	80	%	ASTM D638
Flexural Modulus ⁴(50.0 mm Span)	2620	MPa	ASTM D790
Flexural Strength ⁵(Yield, 50.0 mm Span)	94.0	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	550	J/m	ASTM D256
Instrumented Dart Impact			ASTM D3763
-30°C, Total Energy	51.0	J	ASTM D3763
23°C, Total Energy	51.0	J	ASTM D3763

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, unannealed, 6.40mm	98.0	°C	ASTM D648
1.8 MPa, unannealed, 3.20mm	83.0	°C	ASTM D648
1.8 MPa, unannealed, 6.40mm	90.0	°C	ASTM D648
Vicat Softening Temperature	99.0	°C	ASTM D1525 ⁶
RTI Elec	80.0	°C	UL 746
RTI Imp	70.0	°C	UL 746
RTI	80.0	°C	UL 746

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	> 1.0E+15	ohms	IEC 60093
Volume Resistivity	> 1.0E+15	ohms·cm	IEC 60093
Dielectric Strength (3.20 mm, in Oil)	17	kV/mm	IEC 60243-1
Relative Permittivity			IEC 60250
50 Hz	2.70		IEC 60250
60 Hz	2.70		IEC 60250
1 MHz	2.70		IEC 60250
Dissipation Factor			IEC 60250
50 Hz	4.0E-3		IEC 60250
60 Hz	4.0E-3		IEC 60250
1 MHz	6.0E-3		IEC 60250

Flammability	Nominal Value	Unit	Test Method
Flame Rating			UL 94
0.750 mm	V-2		UL 94
1.50 mm	V-0		UL 94
2.00 mm	5VB		UL 94

Injection	Nominal Value	Unit
Drying Temperature	82.0 - 88.0	°C
Drying Time	3.0 - 4.0	hr
Drying Time, Maximum	8.0	hr
Suggested Max Moisture	0.040	%
Suggested Shot Size	30 - 80	%
Rear Temperature	221 - 254	°C
Middle Temperature	221 - 277	°C
Front Temperature	243 - 277	°C
Nozzle Temperature	243 - 277	°C
Processing (Melt) Temp	243 - 277	°C
Mold Temperature	60.0 - 82.0	°C
Back Pressure	0.345 - 0.689	MPa
Screw Speed	40 - 70	rpm
Vent Depth	0.038 - 0.076	mm

Note Message
1 .	50 mm/min
2 .	Type 1, 50mm/min
3 .	Type 1, 50mm/min
4 .	1.3 mm/min
5 .	1.3 mm/min
6 .	标准 B (120°C/h), 载荷2 (50N)

Resin Grade	Manufacturer	Category	Trademark
Marlex® HHM 5502LD	Chevron Phillips Chemical Company LLC	HDPE	Marlex®
RTP 3400-4 TFE 15	RTP Company	LCP	RTP
Tecodur® PB70 CR30 BK111	Eurotec Engineering Plastics	PBT	Tecodur®
ADDINYL C2 V20	ADDIPLAST	Nylon 66/6	ADDINYL
Geon™ 180 Series 180X7	Mexichem Specialty Resins, Inc.	PVC Homopolymer	Geon™ 180 Series