Order Products : sales@su-jiao.com

Exelene® HDPE 5502M

Category:	HDPE , High Density Polyethylene
Manufacturer:	Montachem International, Inc.
Trademark:	Exelene® HDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	G3uy8D_Exelene-HDPE-5502M.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Applications:

Bottles for home use chemical liquid substances (bleach) and industrial chemicals (lubricants) up to 10 litters.

Bottles containing liquids for personal use (shampoo). Bottles for pharmaceutical products.

Characteristics:

The Exelene resin HDPE 5502M meets the requirements of section 177.1520, paragraph C, from chapter 21 denominated "Olefin Polymers" from the Code of Federal Regulations of the FDA, to be utilized with direct food contact.

General Information
Additive	Antioxidant
Features	Antioxidant Copolymer Food Contact Acceptable High Density
Uses	Bottles Food Containers Food Service Applications Personal Care Pharmaceuticals
Agency Ratings	FDA 21 CFR 177.1520(c)
Processing Method	Extrusion Blow Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.953	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR)			ASTM D1238
190°C/2.16 kg	0.35	g/10 min
190°C/21.6 kg ¹	30	g/10 min
Environmental Stress-Cracking Resistance
3.10 mm, F50	45.0	hr	ASTM D1693A
1.90 mm, F50	35.0	hr	ASTM D1693B
ESCR - In Standard Bottles by extrusion - blow molding	> 20.8	day	ASTM D2561

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, 1 sec, 23°C)	67		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus - Tangent ²(3.20 mm)	1380	MPa	ASTM D638
Tensile Strength ³(Yield)	27.6	MPa	ASTM D638
Tensile Elongation ⁴(Break)	600	%	ASTM D638

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (3.20 mm)	270	J/m	ASTM D256A
Tensile Impact Strength	242	kJ/m²	ASTM D1822

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load ⁵(0.45 MPa, Unannealed)	76.0	°C	ASTM D648
Brittleness Temperature ⁶	< -75.0	°C	ASTM D746A
Vicat Softening Temperature	127	°C	ASTM D1525 ⁷
Melting Temperature	129	°C	DSC

Note Message
1 .	HLMFI
2 .	13 mm/min
3 .	Type IV, 50 mm/min
4 .	Type IV, 50 mm/min
5 .	2°C/min
6 .	F50; 25 lbf*in
7 .	Rate A (50°C/h), Loading 1 (10 N)

Resin Grade	Manufacturer	Category	Trademark
Qenos PE HDF895	Qenos Pty Ltd	HDPE, MMW	Qenos PE
Sindustris PC GN5002RFM	Sincerity Australia Pty Ltd.	PC	Sindustris PC
Aaroprene® TFPP 2020	Aaron Industries Corp.	PP, Unspecified	Aaroprene®
Geon™ Vinyl Flexible R339AE	PolyOne Corporation	PVC, Flexible	Geon™ Vinyl Flexible
MACOMASS PVC MM-PVC E 1570	MACOMASS Verkaufs AG	PVC, Flexible	MACOMASS PVC