Order Products : sales@su-jiao.com
Generic Rubber - Silica
| Category: | Rubber , Rubber |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G3ORgz_Generic-Rubber---Silica.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Rubber - Silica This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 0.241 to 4.14 | MPa | ASTM D638 |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density (23°C) | 1.09 to 1.21 | g/cm³ | |
| Pot Life (23°C) | 90 to 330 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (23°C) | 14 to 80 | ||
| Tensile Strength (23°C) | 4.65 to 10.6 | MPa | |
| Tensile Elongation at Break (23°C) | 700 to 1500 | % | |
| Tear Strength (23°C) | 24.5 to 52.5 | kN/m |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Safron® H510-02 | Safripol (PTY) LTD | PP Homopolymer | Safron® |
| SCANLON A 6005B UV | Polykemi AB | ABS+Nylon | SCANLON A |
| TECNOBLEND B32 | Taro Plast S.p.A. | ABS+Nylon | TECNOBLEND |
| DISTRUMID 6 MV | Distrupol | Nylon 6 | DISTRUMID |
| Plenco 03356 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
