Order Products : sales@su-jiao.com
Formolene® HB5202A
| Category: | HDPE Copolymer , High Density Polyethylene Copolymer |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G2w7ua_Formolene-HB5202A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
(Produced using licensor formulation for HHM 5202LD) High Density Polyethylene Hexene Copolymer for Blow Molding - With Antistat Formolene HB5202A is designed for applications requiring excellent stiffness and stress crack resistance properties. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.35 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | |||
| Compression Molded, F50 | 50.0 | hr | ASTM D1693B |
| 100% Igepal, Compression Molded, F50 | 50.0 | hr | ASTM D1693A |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Compression Molded) | 26.9 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, Compression Molded) | > 600 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 1310 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature 3 | < -118 | °C | ASTM D746 |
| Note Message | |
|---|---|
| 1 . | Type IV, 51 mm/min |
| 2 . | Type IV, 51 mm/min |
| 3 . | Compression Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PA 6.6 7510 GF 50 | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| Nirion 1015/M | Soredi S.p.a. | PC | Nirion |
| ASTALON™ S3000 | Marplex Australia Pty. Ltd. | PC | ASTALON™ |
| Hostaform® C 27021 XAP² ™ | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| LightSpan® LS2-3354 | NuSil Technology | Silicone | LightSpan® |
