Order Products : sales@su-jiao.com
SABIC® Vestolen A 5061
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® Vestolen A |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | G02uHS_SABIC-Vestolen-A-5061.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® Vestolen A 5061 is a natural bimodal high density polyethylene (HDPE) resin. Typical applications include semi-finished goods like sheets as well as non-pressure pipe applications such as cable conduits. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.950 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 0.40 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (2.00 mm, Compression Molded) | 1000 | MPa | ISO 527-2/1BA/50 |
| Tensile Stress (Yield, 2.00 mm, Compression Molded) | 23.0 | MPa | ISO 527-2/1BA/50 |
| Tensile Strain (Yield, 2.00 mm, Compression Molded) | 9.0 | % | ISO 527-2/1BA/50 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature (DSC) | 123 to 127 | °C | DIN 53765 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYLAC® PA-777B | CHI MEI CORPORATION | ABS | POLYLAC® |
| Caltex PP MR41 | GS Caltex | PP, Unspecified | Caltex PP |
| Panlite® LN-3000RM | TEIJIN LIMITED | PC | Panlite® |
| PLUSTEK PB145 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
| ExxonMobil™ HDPE HTA 002HD5 | ExxonMobil Chemical | HDPE, UHMW | ExxonMobil™ HDPE |
