| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Karina Ind. e Com. de Plásticos Ltda |
| Trademark: | KARIPRENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Fz99h0_KARIPRENE-CREPE-6122-23-RTR.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
| THERMOPLASTIC RUBBER COMPOUND RECOMMENDED FOR SOLES INJECTION. |
| General Information | |
|---|---|
| Additive |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 to 0.960 | g/cm³ | ASTM D792 |
| Color | OK | ME 12 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Resistance | < 220 | mm³ | DIN 53516 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A, 15 sec | 58 to 62 | ||
| Shore A, Injection Molded | 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | > 4.90 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | > 450 | % | ASTM D638 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ MAXBATCH YM-618.G001-1000 | PolyOne Corporation | PP, Unspecified | Maxxam™ |
| ALTECH® PA6 A 1000/110 IM | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| DINALON® A1S25 G30XV0 | Grupo Repol | Nylon 66 | DINALON® |
| HiFill® PBT GF30 HR BK | Techmer Engineered Solutions | PBT | HiFill® |
| HiFill® PA4/6 GF30 HS NAT | Techmer Engineered Solutions | Nylon 46 | HiFill® |