Order Products : sales@su-jiao.com

POTICON NT962

Category:	Nylon, Unspecified , Polyamide
Manufacturer:	Otsuka Chemical Co., Ltd.
Trademark:	POTICON
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Fz3Swm_POTICONNT962.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The Poticon series features a potassium titanate micro-filler compounded in thermoplastic resins to provide outstanding micro-reinforcement and dimensional stability. The excellent surface smoothness of these compounds limits friction toward opposing materials, reducing wear and allowing for greaseless applications. Moreover, as Poticon diminishes damage toward the mold and metal die and offers excellent recyclability, it also decreases processing costs.

Advantages

Microscopic reinforcement

Superior friction sliding and wear reduction

Excellent dimensional accuracy and surface smoothness

Highly recyclable

Applications

Automotive Parts (gears, bearings)

LED Reflectors

Watch Parts (gears, ground plane)

Camera (image stabilization parts)

Sliding Parts (gears, wheel bearing)

Camera Module Parts

Motor Parts (cog-wheels, bearings)

NT962 Property: High strength, Slide, Low water absorption

General Information
Features	High Dimensional Stability Low friction coefficient High strength Recyclable materials Low or no water absorption
Uses	LEDs Gear Application in Automobile Field Camera application Bearing
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.36	g/cm³	ASTM D792
Molding Shrinkage
Flow	0.70	%
Transverse flow	1.1	%
Water Absorption (Equilibrium)	0.12	%	ASTM D570

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)	88		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	131	MPa	ASTM D638
Tensile Elongation (Break)	3.5	%	ASTM D638
Flexural Modulus	8100	MPa	ASTM D790
Flexural Strength	202	MPa	ASTM D790
Coefficient of Friction (vs. Steel - Dynamic)	0.21
Abrasion Loss
-- ¹	3.00	10^-3 mm³/N·km
of counterpart ²	0.00	10^-3 mm³/N·km

Thermal	Nominal Value	Unit	Test Method
Heat Distortion	248	°C	ASTM D648

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	42	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
CLTE - Flow	2.4E-5	cm/cm/°C	ASTM D696

Injection	Nominal Value	Unit
Processing (Melt) Temp	310 - 330	°C
Mold Temperature	140 - 150	°C
Injection Pressure	50.0 - 100	MPa

Note Message
1 .	Surface pressure: 1MPa
2 .	Slipping velocity: 0.3m/sec

Resin Grade	Manufacturer	Category	Trademark
PrimoPrene 45A-1000	KMI Group Inc.	TPV	PrimoPrene
StarMediflex P 7020-1000	STAR Thermoplastic Alloys & Rubbers, Inc.	TPE	StarMediflex
Xuchuan XCS-15HN	Xuchuan Chemical (Suzhou) Co., Ltd	PUR, Unspecified	Xuchuan
NANTEX® 630A	Nantex Industry Co., Ltd.	NBR	NANTEX®
GAPEX® RPP30EB16NA	Ferro Corporation	PP Homopolymer	GAPEX®