Order Products : sales@su-jiao.com
TECACOMP® PBT TC black 4207
| Category: | PBT , Polybutylene Terephthalate |
| Manufacturer: | Ensinger GmbH |
| Trademark: | TECACOMP® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FyF9Tm_TECACOMPPBTTCblack4207.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Main features
Target Industries
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.59 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (280°C/5.0 kg) | 19 | g/10 min | ISO 1133 |
| Melt Volume-Flow Rate (MVR) (280°C/5.0 kg) | 12.0 | cm³/10min | ISO 1133 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | < 0.10 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 8500 | MPa | ISO 527-2 |
| Tensile Stress | 45.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 1.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 8.0 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 190 | °C | ISO 75-2/A |
| Glass Transition Temperature | 60.0 | °C | DIN 53765 |
| Melting Temperature | 225 | °C | DIN 53765 |
| CLTE - Flow | ISO 11359-2 | ||
| 23 to 45°C | 2.8E-5 | cm/cm/°C | ISO 11359-2 |
| 70 to 120°C | 4.9E-5 | cm/cm/°C | ISO 11359-2 |
| Specific Heat | 1500 | J/kg/°C | DIN EN 821 |
| Thermal Conductivity | DIN EN 821 | ||
| -- 1 | 3.0 | W/m/K | DIN EN 821 |
| -- 2 | 12 | W/m/K | DIN EN 821 |
| Service Temperature | |||
| long term | 110 | °C | |
| short term | 170 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | < 1.0E+4 | ohms | DIN EN 61340 |
| Volume Resistivity | < 1.0E+6 | ohms·cm | DIN EN 61340 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flammability Classification | HB | IEC 60695-11-10, -20 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 | °C | |
| Drying Time | 3.0 - 6.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Processing (Melt) Temp | 240 - 270 | °C | |
| Mold Temperature | 130 | °C |
| Note Message | |
|---|---|
| 1 . | Through-plane |
| 2 . | In-plane |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinpolene MBW2422 | Teknor Apex Asia Pacific PTE. LTD. | LDPE | Sinpolene |
| Nylene® 9110 | Custom Resins Group | Nylon 610 | Nylene® |
| Hanwha Total PP TB54 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, High Crystal | Hanwha Total PP |
| Kumho STE H5160 | Korea Kumho Petrochemical Co., Ltd. | Rubber | Kumho STE |
| Novalloy-B B6528 | PlastxWorld Inc. | ABS+PBT | Novalloy-B |
