Order Products : sales@su-jiao.com
PrimaFlex® SAN 0750-BT
| Category: | SAN , Styrene Acrylonitrile |
| Manufacturer: | Plastic Solutions, Inc. |
| Trademark: | PrimaFlex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Fv4SAP_PrimaFlex-SAN-0750-BT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Description: SAN 0750-BT is an injection molding grade of transparent SAN with a blue tint. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 7.5 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.30 to 0.40 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 83 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3280 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 72.4 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 2.6 | % | ASTM D638 |
| Flexural Modulus | 3450 | MPa | ASTM D790 |
| Flexural Strength | 115 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 21 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 96.1 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NuSil MED-4750 | NuSil Technology | Rubber | NuSil |
| BMC 800 | Bulk Molding Compounds, Inc. | Polyester, TS | BMC |
| FiberCal™ LD | Heritage Plastics, Inc. | LLDPE | FiberCal™ |
| Hipolyene 8110 | Zylog Plastalloys | TPO (POE) | Hipolyene |
| Plexiglas® V052i-58208RB | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Plexiglas® |
