Order Products : sales@su-jiao.com

Extir® CM Galileo Europa 5

Category:	PS (EPS) , Expanded Polystyrene
Manufacturer:	Versalis S.p.A.
Trademark:	Extir®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Ft8Qg6_Extir-CM-Galileo-Europa-5.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Extir CM is the new range of expandable products produced using Continuous Mass technology. All the products have a very low dimensional dispersion and a reduced content of blowing agent. Extir CM does not contain CFC or HCFC. Extir CM Galileo Europa 5 contains an atherman additive that reduces heat transfer and the items produced with it, grey in colour, have excellent thermal insulation properties. Its particular formula permits the use of thinner boards to get the same thermal resistance. Applications Extir CM Galileo Europa 5 achieves optimum thermal insulation performance. It is therefore recommended for all applications in which thickness is a limiting factor and fire resistance is not compulsory: cavity wall insulation thermoacoustic panels coupled with plasterboard.

Message

Extir CM is the new range of expandable products produced using Continuous Mass technology. All the products have a very low dimensional dispersion and a reduced content of blowing agent. Extir CM does not contain CFC or HCFC.
Extir CM Galileo Europa 5 contains an atherman additive that reduces heat transfer and the items produced with it, grey in colour, have excellent thermal insulation properties. Its particular formula permits the use of thinner boards to get the same thermal resistance.

Applications
Extir CM Galileo Europa 5 achieves optimum thermal insulation performance. It is therefore recommended for all applications in which thickness is a limiting factor and fire resistance is not compulsory:

cavity wall insulation

thermoacoustic panels coupled with plasterboard.

General Information
Additive	Blowing Agent Heat Stabilizer
Features	Expandable Good Surface Finish Low Shrinkage Thermally Insulating
Uses	Insulation Reinforced Panels
Appearance	Grey

Physical	Nominal Value	Unit
Density	0.0120 to 0.0250	g/cm³
Apparent Density
-- ¹	0.01	g/cm³
-- ²	0.02	g/cm³
--	0.59 to 0.63	g/cm³
Particle Size	0.900 to 1.60	mm

Note Message
1 .	on a continuous pre-expander after two expansions
2 .	on a discontinuous pre-expander

Resin Grade	Manufacturer	Category	Trademark
Sinpolene MBW1465	Teknor Apex Asia Pacific PTE. LTD.	PS (Specialty)	Sinpolene
Trademark PE LLB1918B	Trademark Plastics Corporation	LLDPE	Trademark PE
Next Nylon 6 Prime Series NG15-01BK	Next Polymers Ltd.	Nylon 6	Next Nylon 6 Prime Series
Alkathene® XLC177	Qenos Pty Ltd	LLDPE	Alkathene®
DINAPLEN® PPH1S07 G30	Grupo Repol	PP Homopolymer	DINAPLEN®