Order Products : sales@su-jiao.com
Shuang-Bang CD-2060
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Shuang-Bang Industrial Corp. |
| Trademark: | Shuang-Bang |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Fsdqr8_Shuang-Bang-CD-2060.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Two component PU Resins General type resin (waterproof) Because the molecular weight of two componet resin is quite low, adding and mixing adequate crosslinker is necessary. It would increase molecular weight and make more meshed PU structure, which would enhance the strength of membrane. Applied to yarn fixation, primer coating, pore filling. The high solid content would enhance water pressure resistance, gross, and firm-feeling of textile coating. Adding promotors would enhance aging condition and reinforce adhesion. Cloth lamination. Lamination of cloth and TPU&PVC. For direct coatings. High water resistance, non-yellowing, hydrosis resistance, good hand-feel, good peeling strength. Two component adhesive. Good adhesion with crosslinker BL-180. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Solvents | MEK/TOL |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | Clear/Transparent | ||
| Solids Content | 59 to 61 | % | |
| Viscosity (25°C) | 40 to 60 | Pa·s |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Modulus (100% Secant) | 1.47 to 2.45 | MPa | |
| Tensile Strength | > 15.7 | MPa | |
| Tensile Elongation at Break | > 380 | % |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3860 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| TAROLOX 111 G3 DX0 | Taro Plast S.p.A. | PET | TAROLOX |
| LNP™ LUBRILOY™ RF208 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRILOY™ |
| Stanyl® WTP81 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| Styropek® BF 295 | Styropek S.A. de C.V. | PS (EPS) | Styropek® |
