Order Products : sales@su-jiao.com

CYROLITE® Protect G23P

Category:	Acrylic (PMMA) , Polymethyl Methacrylate Acrylic
Manufacturer:	Evonik Cyro LLC
Trademark:	CYROLITE®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	FsAKPH_CYROLITE-Protect-G23P.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

CYROLITE® Protect and CYROLITE® Protect 2 acrylic-based multipolymer compounds and CYREX® Protect acrylic-polycarbonate alloy provide antimicrobial capabilities* against a variety of microorganisms commonly found in healthcare facilities. Antimicrobial products are used in medical devices for secondary infection management or to inhibit bacterial growth.

Characteristics
Transparent green tint, easy to process and free of bisphenol A (BPA)

Benefits

Antimicrobial capabilities within the polymer structure. No secondary operations required.

Chemical resistance to lipids and alcohol

Easily welded

Bondable to PVC tubing

Excellent impact strength

EtO, gamma and e-beam sterilizable

Typical Medical Applications
Luer connectors, IV spikes, needle hubs, adapters, fittings, filter housings, Y-sites, valve assemblies, protection caps and covers and sharp needle dispenser receptacles. CYREX® Protect offers excellent properties for use in hand-held medical device housings.

General Information
Features	Bondability BPA Free E-beam Sterilizable Ethylene Oxide Sterilizable Food Contact Acceptable Good Chemical Resistance High Impact Resistance Microbe Resistant Radiation Sterilizable Weldable
Uses	Caps Connectors Filters Fittings Housings Medical/Healthcare Applications Valves/Valve Parts
Agency Ratings	EC 1907/2006 (REACH) FDA 21 CFR 176.170 USP Class VI
RoHS Compliance	RoHS Compliant
Appearance	Transparent Green
Forms	Pellets
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (230°C/5.0 kg)	10	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	2100	MPa	ASTM D638
Tensile Strength	47.2	MPa	ASTM D638
Tensile Elongation			ASTM D638
Yield	3.0	%
Break	8.0	%
Flexural Modulus	2200	MPa	ASTM D790
Flexural Strength	70.2	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 6.35 mm)	64	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Annealed, 6.35 mm)	75.0	°C	ASTM D648
Vicat Softening Temperature	100	°C	ASTM D1525

Optical	Nominal Value	Unit	Test Method
Transmittance (3000 µm)	40.0	%	ASTM D1003
Haze (3000 µm)	48	%	ASTM D1003

Injection	Nominal Value	Unit
Drying Temperature	79.0	°C
Drying Time	3.0 to 4.0	hr
Processing (Melt) Temp	232 to 249	°C
Mold Temperature	50.0 to 82.0	°C

Extrusion	Nominal Value	Unit
Drying Temperature	79.0	°C
Drying Time	3.0 to 4.0	hr
Melt Temperature	232 to 249	°C

Resin Grade	Manufacturer	Category	Trademark
PRIMALENE WPP653	Southern Polymer, Inc.	LLDPE	PRIMALENE
Shin-Etsu Elastomer FE-381U	Shin-Etsu Silicones of America	Fluoro Si	Shin-Etsu Elastomer
NEALID XW400H - 8229	AD majoris	Nylon+Olefin	NEALID
Cheng Yu N6GV10	Cheng Yu Plastic Company Limited	Nylon 6	Cheng Yu
LNP™ VERTON™ RX89047 compound	SABIC Innovative Plastics	Nylon 66	LNP™ VERTON™