Order Products : sales@su-jiao.com
Premier LD00319 - A
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Premier Polymers, LLC. |
| Trademark: | Premier |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Fq5iYg_Premier-LD00319---A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Premier LD00319 is a low density fractional melt blown film resin suitable for heavy duty film requiring high strength and processability. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.25 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus | ASTM D882 | ||
| MD | 193 | MPa | |
| TD | 241 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Break | 25.5 | MPa | |
| TD : Break | 24.1 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 150 | % | |
| TD : Break | 550 | % | |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 300 | g | |
| TD | 150 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze | 20 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Badamid® PA612 GF33 | Bada AG | Nylon 612 | Badamid® |
| AKROMID® B3 ICF 40 black (5020) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| ICORENE® N9702 | ICO Polymers EMEA, A Division of A. Schulman | PUR-Ester | ICORENE® |
| POFEX 8200EP85V | POLYROCKS CHEMICAL CO., LTD | TPE | POFEX |
| POLYFORM C 12 natural | POLYMA Kunststoff GmbH & Co. KG | Acetal (POM) Homopolymer | POLYFORM |
