Order Products : sales@su-jiao.com

Marlex® 9012

Category:	HDPE , High Density Polyethylene
Manufacturer:	Chevron Phillips Chemical Company LLC
Trademark:	Marlex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	FnT1MZ_Marlex-9012.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Marlex® 9012 is a High Density Polyethylene material. It is available in Europe, Latin America, or North America for injection molding.

Important attributes of Marlex® 9012 are:

Eco-Friendly/Green

Food Contact Acceptable

Good Stiffness

Hexene Comonomer

Impact Resistant

Typical applications include:

Food Contact Applications

Automotive

Caps/Lids/Closures

Consumer Goods

Containers

General Information
Features	Food Contact Acceptable Good Flow Good Impact Resistance Good Stiffness Hexene Comonomer Recyclable Material
Uses	Automotive Applications Closures Household Goods Non-specific Food Applications Pails Toys
Agency Ratings	ASTM D 4976-PE232 FDA 21 CFR 177.1520(c) 3.2a
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.952	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	12	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal, Compression Molded, F50)	15.0	hr	ASTM D1693B

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, Compression Molded)	63		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, Compression Molded)	27.0	MPa	ASTM D638
Tensile Elongation ²(Break, Compression Molded)	900	%	ASTM D638
Flexural Modulus - Tangent ³(Compression Molded)	1270	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -75.0	°C	ASTM D746
Vicat Softening Temperature	124	°C	ASTM D1525 ⁴

Note Message
1 .	Type IV, 51 mm/min
2 .	Type IV, 51 mm/min
3 .	13 mm/min
4 .	Rate A (50°C/h), Loading 1 (10 N)

Resin Grade	Manufacturer	Category	Trademark
Styrolution PS 124N/L	INEOS Styrolution Group GmbH	PS (GPPS)	Styrolution PS
HiFill® PA6/6 GF45 TL10	Techmer Engineered Solutions	Nylon 66	HiFill®
IROGRAN® A 92 H 4656	Huntsman Corporation	TPU-Polyester	IROGRAN®
MAJORIS DE027 - 8229	AD majoris	PP, Unspecified	MAJORIS
Badamid® PA12 M20 FR V5	Bada AG	Nylon 12	Badamid®