Order Products : sales@su-jiao.com
Borstar® LE8707
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | Borstar® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Fm3yR1_Borstar-LE8707.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Borstar LE8707 is a black linear low density (LLD) jacketing compound, which is produced with the Borealis proprietary Borstar bimodal process technology. Borstar technology allows the manufacturing of polymers outside the traditional MFR and density range making it possible to optimize processability, reduce shrinkage and yet provide excellent physical toughness and environmental stress crack resistance (ESCR). Borstar LE8707 contains 2.5% well-dispersed carbon black in order to ensure excellent weathering resistance. |
| General Information | |
|---|---|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | ISO 1183 | ||
| -- 1 | 0.936 | g/cm³ | ISO 1183 |
| -- 2 | 0.923 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.85 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (50°C, 10% Igepal, F0) | 5000 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | |||
| Shaw D, 1 sec | 54 | ISO 868 | |
| Shaw D, 3 seconds | 53 | DIN 53505 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 30.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Break) | 800 | % | ISO 527-2/50 |
| Flexural Modulus | 400 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -76.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | IEC 60093 |
| Dielectric Strength | 60 | kV/mm | IEC 60243-1 |
| Dielectric Constant (1 MHz) | 2.50 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 4.0E-4 | IEC 60250 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Pressure Test - at High Temperature 3(115°C) | % | IEC 60811-3-1 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 | °C | |
| Die Temperature | 210 | °C |
| Extrusion instructions |
|---|
| Preheating: 90°CFeed Section: 170°CMetering Section: 200°C |
| Note Message | |
|---|---|
| 1 . | Compound |
| 2 . | Base Resin |
| 3 . | 6 hours |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Propafilm™ RGN60 | Innovia Films Ltd. | PP Alloy | Propafilm™ |
| S&E Automotive XP11-289A15 | S&E Specialty Polymers, LLC | PVC, Unspecified | S&E Automotive |
| Next Nylon 6 Prime Series NG15-01BK | Next Polymers Ltd. | Nylon 6 | Next Nylon 6 Prime Series |
| HiPrene® HLG73BE | GS Caltex | PP, Unspecified | HiPrene® |
| Optix® CA-924 G | Plaskolite West, Inc. | Acrylic (PMMA) | Optix® |
