Alkatuff® LL711UV

Category: LLDPE , Linear Low Density Polyethylene
Manufacturer: Qenos Pty Ltd
Trademark: Alkatuff®
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: FkO0HG_Alkatuff-LL711UV.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Alkatuff LL711UV is a hexene LLDPE material specifically designed for rotational moulding applications that require excellent ESCR, chemical resistance, stiffness and toughness. Alkatuff LL711UV is UV stabilized to provide prolonged outdoor protection in Australian conditions.

Application:
Alkatuff LL711UV is designed for chemical and water tanks and other applications where toughness, stiffness and UV protection is important.

Specifications:
Alkatuff LL711UV complies with the base resin requirements of AS/NZS 4766 Polyethylene storage tanks for water and chemicals.

If this product is used for food contact applications, then the user needs to ensure compliance with the requirements of AS2070-1999 and relevant FDA regulations.

When used in accordance with FDA application guidelines, this product meets the requirements of FDA 21 CFG 177.1520 (c) 3.1a and AS2070-1999 section 4.1.1(a). This product contains UV light stabilizers and so end use restrictions as described in FDA 21 CFR 176.170 (c) table 2 conditions D to G apply. Volume and food type restrictions may apply. This product should not be used in applications for holding food during cooking without the required compliance testing. This information is only for the Major End Use described on this Product Data sheet. For further information, please contact your primary Qenos contact.
General Information
Additive
  • UV Stabilizer
Features
  • Food Contact Acceptable
  • Good Chemical Resistance
  • Good Stiffness
  • Good Toughness
  • Good UV Resistance
  • High ESCR (Stress Crack Resist.)
Uses
  • Outdoor Applications
  • Tanks
Agency Ratings
  • AS 2070-1999 4.1.1(a)
  • AS/NZS 4766
  • FDA 21 CFR 176.170(c), Table 2 2
  • FDA 21 CFR 177.1520(c) 3.1a
Processing Method
  • Rotational Molding
PhysicalNominal ValueUnitTest Method
Density 0.938g/cm³ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)3.0g/10 minASTM D1238
Environmental Stress-Cracking Resistance (10% Igepal, F50)> 1000hrASTM D1693A
MechanicalNominal ValueUnitTest Method
Tensile Strength 1(Yield)19.5MPaASTM D638
Flexural Modulus - 1% Secant 800MPaASTM D790
Hydrostatic Design Basis 28.62MPaASTM D2837
ThermalNominal ValueUnitTest Method
Thermal Stability PassAS/NZS 4766
Additional InformationNominal ValueTest Method
Drinking Water Contact PassAS/NZS 4020
UV Protection UV24ASTM D2565
ThermalNominal ValueUnitTest Method
Peak Melting Temperature 128°CASTM D3418
Note Message
1 .50 mm/min
2 .A service factor must be applied in accordance with AS/NZS 4766.
Resin Grade Manufacturer Category Trademark
VESTODUR® X4877 Evonik Industries AG PBT VESTODUR®
ELASTOSIL® LR 3070/30 A/B Wacker Chemie AG Silicone ELASTOSIL® LR
LNP™ THERMOCOMP™ RF003AXH compound SABIC Innovative Plastics Nylon 66 LNP™ THERMOCOMP™
PANDEX TP-1620 DIC Corporation PUR, Unspecified PANDEX
ADVANCENE™ EE-1801-BSB ETHYDCO LLDPE ADVANCENE™