Order Products : sales@su-jiao.com
Soarnol® TF2905B
| Category: | EVOH , Ethylene Vinyl Alcohol |
| Manufacturer: | Soarus L.L.C. |
| Trademark: | Soarnol® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FgzF86_Soarnol-TF2905B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Soarnol TF2905B is a special grade of Soarnol with a 29 mol% ethylene content and an intermediate melt flow rate. This resin has a wide thermoforming process window with excellent gas barrier. Soarnol TF2905B is specifically designed for thermoforming applications using Polystyrene and Polyethylene structural layers. This resin can also be used in thermoforming applications using Polypropylene structural layers. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (210°C/2.16 kg) | 5.0 | g/10 min | |
| Ethylene Content | 29.0 | wt% | Internal method |
| Volatile Matter | % |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Permeability 1(20°C, 20 µm) | 0.500 | cm³/m²/24 hr | Internal method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | 62.0 | °C | DSC |
| Melting Temperature | 188 | °C | DSC |
| Peak Crystallization Temperature (DSC) | 163 | °C | DSC |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 180 | °C | |
| Cylinder Zone 2 Temp. | 200 | °C | |
| Cylinder Zone 3 Temp. | 220 | °C | |
| Cylinder Zone 4 Temp. | 230 | °C | |
| Cylinder Zone 5 Temp. | 230 | °C | |
| Adapter Temperature | 230 | °C |
| Extrusion instructions |
|---|
| Extruder: 40 mm Single screw extruder, L/D = 28Screw: Full-flighted, constant pitch type, CR = 3.5Screen pack: 80/120/50 meshDie: Manifold type, die width = 450 mm, lip clearance = 0.2 mm |
| Note Message | |
|---|---|
| 1 . | Measured with OXTRAN 10/50 (MOCON), 65%RH |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® SF800 | Covestro - Polycarbonates | PC | Makrolon® |
| ELASTOSIL® LR 3856/30 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
| Keltan® 8550 | LANXESS Buna GmbH | EPDM | Keltan® |
| Stanyl® HFX82S | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| MAXAMID™ EPDM6G33-NC010 | Pier One Polymers, Inc. | Nylon 6 | MAXAMID™ |
