Order Products : sales@su-jiao.com

Lutene® XL2902BK

Category:	PE, Unspecified , Polyethylene
Manufacturer:	LG Chem Ltd.
Trademark:	Lutene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	FdEpdG_Lutene-XL2902BK.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Applications:

Excellent-smoothness extra clean semiconductive compound for conductor and bonded insulation shielding of high voltage power cable.

Performance:

Excellent Surface Smoothness

Excellent Electrical Properties - Excellent Physical and Thermal Properties

Long-run Extrusion without Scorch - Contaminant Free

Description:
LUTENE® XL2902BK is a crosslinkable semiconductive shielding compound for conductor and bonded insulation shielding of High and Extra high voltage power cables. LUTENE® XL2902BK is compatible with both copper and aluminum conductors. LUTENE® XL2902BK was specifically developed to provide a super-smoothness surface yielding a more perfect interface between extruded shield and the insulation. As a result, significantly improved cable performance can be expected. LUTENE® XL2902BK has stable volume resistivity charateristics at elevated temperature.

General Information
Features	Clean/High Purity Crosslinkable Good Electrical Properties Good Surface Finish Semi Conductive
Uses	Extra High Voltage Insulation Insulation Shield Medium Voltage Insulation
Agency Ratings	AEIC CS7-93 AEIC CS8-00 ICEA S-66-524 ICEA S-94-649 IEC 60480 IEC 60502 IEC 62067

Physical	Nominal Value	Unit	Test Method
Density	1.14	g/cm³	ASTM D1505
Environmental Stress-Cracking Resistance	> 200	hr	ASTM D1693
Moisture Content	< 500	ppm	Karl Fisher

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	> 14.7	MPa	ASTM D638
Tensile Elongation ²(Break)	> 160	%	ASTM D638

Aging	Nominal Value	Unit	Test Method
Retention of Tensile Elongation ³	> 90	ppm	ASTM D638
Retention of Tensile Strength ⁴	> 90	%	ASTM D638

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -50.0	°C	ASTM D746

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity			ICEA S-66-524
23°C	< 50	ohms·cm
90°C	< 3.0E+2	ohms·cm

Extrusion	Nominal Value	Unit
Drying Temperature	60.0 to 70.0	°C
Drying Time	4.0	hr
Melt Temperature	100 to 125	°C

Note Message
1 .	200 mm/min
2 .	200 mm/min
3 .	121°C, 168 Hr
4 .	121°C, 168 Hr

Resin Grade	Manufacturer	Category	Trademark
ADDINYL B2 ZM30	ADDIPLAST	Nylon 6	ADDINYL
CompaDur® 125 GF 30 natural (016)	DimeLika Plast GmbH	PBT+PET	CompaDur®
Elvaloy® AC 3427	DuPont Packaging & Industrial Polymers	EnBA	Elvaloy®
LUVOCOM® 1105-7373	Lehmann & Voss & Co.	PEEK	LUVOCOM®
Hostacom CA 199N E BLACK	LyondellBasell Industries	PP Copolymer	Hostacom