Order Products : sales@su-jiao.com

3M™ Dyneon™ Fluoroplastic PVDF 60120000

Category:	PVDF , Polyvinylidene Fluoride
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ Fluoroplastic
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	FbKXUO_3M-Dyneon-Fluoroplastic-PVDF-60120000.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

3M™ Dyneon™ Fluoroplastic PVDF 6012/0000 is a Polyvinylidene Fluoride (PVDF) product. It can be processed by compression molding or extrusion and is available in Europe or North America. Applications of 3M™ Dyneon™ Fluoroplastic PVDF 6012/0000 include electrical/electronic applications, automotive, construction applications, food contact applications and medical/healthcare.

Characteristics include:

Chemical Resistant

Flame Retardant

Good Dimensional Stability

Good Toughness

Good UV Resistance

General Information
Features	Flame Retardant Good Abrasion Resistance Good Chemical Resistance Good Dimensional Stability Good Toughness Good UV Resistance Good Weather Resistance High Strength High Viscosity Homopolymer Low Gas Permeability Low Liquid Permeability Low Smoke Emission Solvent Resistant
Uses	Automotive Applications Batteries Construction Applications Electrical/Electronic Applications Non-specific Food Applications Oil/Gas Applications Pharmaceuticals Wire & Cable Applications
Forms	Pellets Powder
Processing Method	Compression Molding Extrusion

Physical	Nominal Value	Unit	Test Method
Density	1.78	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)			ASTM D1238
230°C/10.0 kg	5.0	g/10 min
230°C/2.16 kg	0.50	g/10 min
230°C/5.0 kg	1.5	g/10 min
Water Absorption ¹(23°C, 24 hr)	< 0.040	%	ISO 62

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ²(Break, 23°C)	35.0 to 50.0	MPa	ASTM D638
Tensile Elongation ³(Break, 23°C)	20 to 50	%	ASTM D638
Flexural Modulus ⁴(23°C)	2100	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Peak Melting Temperature	173	°C	ASTM D3418

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity ⁵	> 1.0E+14	ohms	ASTM D257
Volume Resistivity ⁶	> 1.0E+14	ohms·cm	ASTM D257

Flammability	Nominal Value	Unit	Test Method
Oxygen Index (3.00 mm)	44	%	ASTM D2863

Note Message
1 .	Method 1
2 .	50 mm/min
3 .	50 mm/min
4 .	2.0 mm/min
5 .	Voltage <1V, after 2 min - 500V
6 .	Intensity = 10mA, after 2 min

Resin Grade	Manufacturer	Category	Trademark
REXtac® APAO RT 2385	Huntsman Corporation	PAO	REXtac® APAO
Cevian®-V V500DLG	PlastxWorld Inc.	ABS	Cevian®-V
Chemlon® 102	Teknor Apex Company (Chem Polymer)	Nylon 66	Chemlon®
Delta PCA 1103	Delta Polymers	PC+ABS	Delta
Durethan® AKV 35 000000	LANXESS GmbH	Nylon 66	Durethan®