Order Products : sales@su-jiao.com
Unilex™ UP.70.960
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | United Polychem |
| Trademark: | Unilex™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FZzNmF_Unilex-UP-70-960.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Unilex™UP. 70.960 is a high density polyethylene material,. This product is available in North America and is processed by blow molding. Unilex™UP. The main features of the 70.960 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.70 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, F50) | 17.5 | hr | ASTM D1693A |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 30.3 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 300 | % | ASTM D638 |
| Flexural Modulus | 1650 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -70.0 | °C | ASTM D746 |
| Injection instructions |
|---|
| Blow Molding Recommended Stock Temperature: 340 - 400°F |
| Note Message | |
|---|---|
| 1 . | Type 4, 51mm/min |
| 2 . | Type 4, 51mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Prixene® EL020E20S | POLYMAT | LLDPE | Prixene® |
| WPP PP PPC3TF1.5-Natural | Washington Penn Plastic Co. Inc. | PP Copolymer | WPP PP |
| CompaDur® 125 GF 20 black (045) | DimeLika Plast GmbH | PBT+PET | CompaDur® |
| Kalix® 9945 HFFR | Solvay Specialty Polymers | HPPA | Kalix® |
| Kepital® F30-52G | KEP Americas | Acetal (POM) Copolymer | Kepital® |
